ATEN Control System - Control Box Gen. 2 with Dual LAN

VK2200

High performance processor embedded with quad-core CPU and 2 GB memory for designing and controlling complex projects
Dual, isolated LAN for secured communication among IT devices
LCD display shows the option for configuration and information display
Supports centralized control and management by ATEN Unizon™

The ATEN Control Box VK2200 is a high-performance second-generation control processor designed to deliver secure, centralized, and scalable automation for modern AV and IT environments. Powered by a quad-core CPU and 2 GB of memory, the VK2200 provides fast response times, real-time status updates, and reliable processing for complex automation tasks and multiuser control applications.

One of the key advantages of the VK2200 is its dual isolated LAN architecture, consisting of a dedicated Control LAN and a separate LAN port. The Control LAN creates an isolated network for connected devices, helping organizations meet strict security and stability requirements. Meanwhile, the LAN port enables seamless integration with ATEN Unizon, allowing centralized monitoring, troubleshooting, and management of multiple AV and control systems from a single platform.

Designed for flexible deployment, the VK2200 can integrate with a wide range of room devices, including AV equipment, lighting systems, conference solutions, air conditioning units, power controls, sensors, and other automation devices.

Key Features

High-performance quad-core processor with 2 GB memory
Dual isolated LAN ports for enhanced security and network stability
Real-time device monitoring and status feedback
Supports complex automation workflows and multiuser access
Centralized management through ATEN Unizon integration
Compatible with AV systems, lighting, HVAC, sensors, and power devices
User-friendly control via mobile devices, touch panels, and keypads
Ethernet-based architecture for scalable installations

Memory
SDRAM	2GB
Flash	8GB
Interfaces
Serial	• 2 x Programmable Bi-directional RS-232/422/485 Port (2 x 5-Pole Terminal Block Connector, configurable via pin assignments); – Baud Rate: 300 to 115200 (default: 9600); – Data Bit: 8 (default) or 7; – Stop Bit: 1 (default) or 2; – Parity: None (default), Even or Odd; – Flow Control: None (default) or RTS/CTS • 6 x Bi-directional RS-232 Port (6 x 3-Pole Terminal Block Connector); – Baud Rate: 300 to 115200 (default: 9600); – Data Bit: 8 (default) or 7; – Stop Bit: 1 (default) or 2; – Parity: None (default), Even or Odd
IR/Serial	• 8 x Programmable IR / Uni-directional RS-232 Port (4 x 4-Pole Terminal Block Connector); IR: TTL level (0 to 5 V) – Carrier Frequency: 10KHz~455KHz; Serial: Uni-directional RS-232 (0 to 5 V) – Baud Rate: 300 to 115200 (default: 9600); – Data Bit: 8 (default) or 7; – Stop Bit: 1 (default) or 2; – Parity: None (default), Even or Odd
Relay	• 8 x Relay Channel (4 x 4-Pole Terminal Block Connector); • Normally open, isolated Relays; • Contact Rating: Max 24 VDC, 2A
I/O	• 8 x Programmable Digital Input / Output Channel (2 x 5-Pole Terminal Block Connector); Digital Output: 300 mA sink from 24 VDC Digital Input: – VDC Mode Input Voltage Range: 0 to 24 VDC; Programmable Range: 1 to 24 VDC; – Dry Contact Mode Pull-up 2k ohms to + 12 VDC
Ethernet	• 2 x RJ-45 Female, 10/100/1000Base-T • Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH Control LAN: • Support DHCP Server • DHCP mode – The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0 LAN: • DHCP mode – The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.1.60 Subnet Mask: 255.255.255.0
VDC	• 4 x 12 VDC Output Port (2 x 4-Pole Terminal Block Connector); • Power Supply: 12 VDC, 2A Max (shared by 4 ports)
USB	1 x USB Type A
Switches
Power	1 x On/Off Switch
IR Learning	1 x IR Receiver LED
Panel Spec
Size	1.6″
Resolution	128×64
Pushbuttons
Select	3 x Pushbuttons (Up, Down, Enter)
Reset Button	1 x Semi-recessed Pushbutton
Power Consumption	AC110V:5.7W:139BTU/h AC220V:6.8W:144BTU/h Note: ● The measurement in Watts indicates the typical power consumption of the device with no external loading. ● The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
Power
Maximum Input Power Rating	100-240 V AC, 50-60 Hz, 1A
Environmental
Operating Temperature	0 – 50°C
Storage Temperature	–20 – 60°C
Humidity	0 – 80% RH, Non-Condensing
Physical Properties
Housing	Metal
Weight	2.62 kg ( 5.77 lb )
Dimensions (L x W x H)	43.24 x 16.32 x 4.40 cm (17.02 x 6.43 x 1.73 in.)
License
Basic (free)	2 free licenses
Max. No. Allowed	32 licenses
Note	The ATEN Control Box comes with two free licenses which are stored in the device itself. Each time a mobile device connects to an ATEN Control Box for remote control, one license on the Control Box will be occupied. To purchase and add additional licenses to your ATEN Control Box, contact your local sales representative for more information.
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.