ATEN Control System - Compact Control Box Gen. 2

VK1100A

High-performance processor embedded with quad-core CPU and 512MB memory for designing and controlling complex projects
USB port for easy project upload
IR learning function for adding IR device drivers
Supports centralized control and management by ATEN Unizon™

The ATEN Compact Control Box VK1100A is a powerful second-generation control processor designed to deliver centralized management for AV, IT, and automation systems. Featuring a quad-core CPU, Gigabit Ethernet connectivity, and 512 MB memory, the VK1100A provides fast response times, real-time status updates, and reliable performance for modern control environments.

As a core component of the ATEN Control System, the VK1100A enables seamless integration with a wide range of devices, including displays, projectors, lighting systems, conference equipment, air conditioning units, motion sensors, power switches, and other room automation technologies. Its compact design makes it ideal for installations where space efficiency is important without sacrificing performance.

The VK1100A supports integration with ATEN Unizon™, a centralized management platform that simplifies system administration by allowing users to monitor, troubleshoot, and maintain multiple AV and control systems from a single dashboard. This centralized approach improves operational efficiency while reducing maintenance complexity.

Built on a standard Ethernet-based architecture, the VK1100A allows organizations to create customized control interfaces through ATEN’s software ecosystem. Users can conveniently manage connected devices through mobile devices, ATEN Keypads, and Touch Panels, providing a consistent and intuitive control experience.

Key Features

High-performance quad-core processor for reliable automation control
Gigabit Ethernet connectivity for efficient communication
Real-time device monitoring and status feedback
512 MB memory for handling advanced control tasks
Multiuser access support for collaborative environments
Integration with ATEN Unizon™ centralized management platform
Customizable GUI control from mobile devices, keypads, and touch panels
Compact design for flexible deployment in space-constrained environments
Compatible with AV, lighting, HVAC, sensors, and power control systems

Memory
SDRAM	512MB
Flash	8GB
Interfaces
Serial	• 1 x Programmable Bi-directional RS-232/422/485 Port (1 x 5-Pole Terminal Block Connector, configurable via pin assignments); – Baud Rate: 300 to 115200 (default: 9600); – Data Bit: 8 (default) or 7; – Stop Bit: 1 (default) or 2; – Parity: None (default), Even or Odd; – Flow Control: None (default) or RTS/CTS • 1 x Bi-directional RS-232 Port (1 x 3-Pole Terminal Block Connector); – Baud Rate: 300 to 115200 (default: 9600); – Data Bit: 8 (default) or 7; – Stop Bit: 1 (default) or 2; – Parity: None (default), Even or Odd
IR/Serial	• 2 x Programmable IR / Uni-directional RS-232 Port (2 x 2-Pole Terminal Block Connector); IR: TTL level (0 to 5 V) – Carrier Frequency: 10KHz~455KHz; Serial: Uni-directional RS-232 (0 to 5 V) – Baud Rate: 300 to 115200 (default: 9600); – Data Bit: 8 (default) or 7; – Stop Bit: 1 (default) or 2; – Parity: None (default), Even or Odd
Relay	• 4 x Relay Channel (2 x 4-Pole Terminal Block Connector); • Normally open, isolated Relays; • Contact Rating: Max 24 VDC, 2A
I/O	• 2 x Programmable Digital Input / Output Channel (1 x 3-Pole Terminal Block Connector); Digital Output: 300 mA sink from 24 VDC Digital Input: – VDC Mode Input Voltage Range: 0 to 24 VDC; Programmable Range: 1 to 24 VDC; – Dry Contact Mode Pull-up 2k ohms to + 12 VDC
Ethernet	• 1 x RJ-45 Female, 10/100/1000Base-T • Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH • DHCP mode – The following default IP settings will be used if no IP is assigned within 30 seconds: IP: 192.168.0.60 Subnet Mask: 255.255.255.0
VDC	• 1 x 12 VDC Output Port (1 x 2-Pole Terminal Block Connector); • Power Supply: 12 VDC, 1A Max
USB	1 x USB Type A
Switches
Power	1 x On/Off Switch
IR Learning	1 x IR Receiver LED
Reset Button	1 x Semi-recessed Pushbutton
Power Consumption	AC110V:4.3W:82BTU/h AC220V:4.5W:83BTU/h Note: ● The measurement in Watts indicates the typical power consumption of the device with no external loading. ● The measurement in BTU/h indicates the power consumption of the device when it is fully loaded.
Power
Maximum Input Power Rating	100-240 V AC, 50-60 Hz, 1A
Environmental
Operating Temperature	0 – 50°C
Storage Temperature	–20 – 60°C
Humidity	0 – 80% RH, Non-Condensing
Physical Properties
Housing	Metal
Weight	1.19 kg ( 2.62 lb )
Dimensions (L x W x H)	20.00 x 16.41 x 4.40 cm (7.87 x 6.46 x 1.73 in.)
License
Basic (free)	2 free licenses
Max. No. Allowed	16 licenses
Note	The ATEN Control Box comes with two free licenses which are stored in the device itself. Each time a mobile device connects to an ATEN Control Box for remote control, one license on the Control Box will be occupied. To purchase and add additional licenses to your ATEN Control Box, contact your local sales representative for more information.
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.