ATEN Professional Online UPS 220V / 230V / 240V 3000VA

OL3000HV

True double-conversion – output power factor is 1 (maximum), which means all of the power supplied is being used for productive work and makes work the most efficient
Programmable power management outlets – users can easily and independently control load segments. During power failure, this feature enables users to extend battery time to mission-critical devices by shutting down noncritical devices
Emergency Power Off function (EPO) – EPO connector at rear panel allows emergency UPS Power Off from a remote location
SNMP + USB + RS-232 multiple communications – allows either USB or RS-232 communication ports to work with the SNMP interface simultaneously

The ATEN Online UPS OL3000HV is a professional 3000VA online uninterruptible power supply (UPS) designed to provide continuous, clean, and reliable power for mission-critical IT equipment. Using true double-conversion technology, it protects connected devices from power outages, voltage fluctuations, surges, and electrical noise while ensuring uninterrupted operation.

Unlike conventional standby UPS systems, the ATEN Online UPS OL3000HV continuously converts incoming AC power into DC and then back into stable AC power. This process eliminates transfer time during power failures, ensuring that connected equipment experiences zero interruption even during unexpected outages or unstable utility power.

With an output power factor of 1.0, the ATEN Online UPS OL3000HV delivers maximum usable power for servers, networking equipment, storage systems, and other critical infrastructure. Its precise output voltage regulation of less than 1% provides stable performance for sensitive electronic devices.

The UPS features programmable power management outlets, allowing users to prioritize critical equipment during power failures. Non-essential devices can be automatically disconnected to extend battery runtime for mission-critical systems.

For flexible monitoring and management, the ATEN Online UPS OL3000HV supports USB, RS-232, and SNMP communication simultaneously. IT administrators can remotely monitor battery health, load levels, runtime, and UPS status through compatible power management software, enabling automated system shutdown and proactive maintenance.

A bright multifunction LCD display provides real-time information, including input voltage, battery capacity, output status, operating mode, load percentage, and estimated backup time. The intuitive three-button interface simplifies configuration and daily operation.

Key Features

Professional 3000VA online UPS
True double-conversion technology with zero transfer time
Output power factor of 1.0 for maximum usable power
Output voltage regulation of less than 1%
Continuous protection against power outages, surges, and voltage fluctuations
Programmable power management outlets for extended battery runtime
Supports USB, RS-232, and SNMP communication simultaneously
Hot-swappable battery design for uninterrupted maintenance
Emergency Power Off (EPO) function
Surge protection with MOV technology
ECO Mode with up to 97% energy efficiency
Intelligent battery charging for longer battery life
Multifunction LCD display with real-time UPS monitoring

General
UPS Topology	Double-Conversion
Energy Saving(max)	>96%(ECO) >91%(AC) >90%(Batt)
HID Compliant USB Port	Yes
Serial Port	Yes
SNMP / HTTP Remote Monitoring	Yes – Optional SNMP CARD
Input
Voltage	220/230/240 VAC
Input Voltage Range	160-300 VAC ± 5% @ 100% load 110-300 VAC ± 5% @ 50% load Derate capacity to 80% when the output voltage is adjusted to 200VAC/208VAC.
Input Frequency Range	40 Hz ~ 70 Hz
Rated Input current	14.5A
Input Power Factor	≧ 0.99 @ nominal voltage (100% load)
Cold Start	Yes
Plug Type	IEC 320 C20
Power cord	6ft (Schuko Plug/UK Plug/AU Plug/IEC Plug)
Output
VA	3000
Watts	3000
On Battery Waveform	Sine Wave
On Battery Frequency	50/60Hz +/- 0.1 Hz
Outlets – Total	9
Outlet Type	(8) IEC 320 C13 +(1) IEC 320 C19
Outlets – Battery & Surge Protected	9
Rated Power Factor	1
Crest Factor	3:1
Harmonic Distortion	≦2 % THDi (Linear Load) ≦ 4 % THDi (Non-linear Load)
Voltage Regulation	± 1%(Batt)
Transfer Time(AC to Batt.)	0ms
Transfer Time(Inverter to Bypass)	4ms(ECO)
Battery
Runtime at Half Load (min)	9.79
Runtime at Full Load (min)	3.41
Battery Type	Sealed Lead-Acid
Battery Pack Voltage	72V
Battery Size	12V/9AH
Battery Quantity	6
Hot-Swappable	Yes
Typical Recharge Time	3 hours recover to 95% capacity@2A charging current. Max charger current 8A
Extended Battery Module	BP72V18AH
Replacement Battery Pack	BC72V9AH
Replacement Battery Pack Quantity	1
Physical Properties
Rack Unit	2U
Type	Rack/Tower
Dimensions (L x W x H)	8.80 x 43.80 x 63.00 cm (3.46 x 17.24 x 24.8 in.)
Weight	28.70 kg ( 63.22 lb )
Environmental
Temperature (Operating / Storage)	0–40°C (non-condensing) / -20 – 50°C
Humidity (Operating & Storage)	20–90 % RH / 10% – 95%(No condensing)
Audible noise at 1M from surface of unit	Less than 50dB
Certifications
Certifications	CE
Approvals	RoHS
Package Contents	1x Rack Mounting Kit 1x Rail Slide Kit 1x RS-232 Cable 1x USB Type A to B Cable 4x Power Cable (1xIEC C19/C20+ 1xIEC C19/Schuko+1xIEC C19/UK+1xIEC C19/AU(15A)) 1x Tower Stand Set
Note	For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.