Dual-WAN
Connect up to two separate WAN internet connections (Ethernet & WiFi) to efficiently load-balance traffic, or configure for redundancy using the WAN fail-over mode.
PT. Gigantika Pratama Prima has extensive solutions portfolio in Data Centre Infrastructure Management, Control Room/Command Centre, Conference Room, Surveillance, Industrial Data Communication & Networking Infrastructure.
+62-21-6530-5789
Email: sales@gigantika.co.id
PT. GIGANTIKA PRATAMA PRIMA
Jl. Agung Tengah 4, Blok i-7 no. 6D Sunter Agung, Jakarta 14350 Indonesia.
Showing 521–540 of 671 results
TRENDnet’s Industrial AC1200 Wireless Dual Band Gigabit PoE+ Router, model TI-WP100, features dual-band AC1200 WiFi to maximize device networking speeds; it is equipped with an 867Mbps Wireless AC network, and a 300Mbps Wireless N network. It supports dual-WAN hybrid connections (Ethernet for load balancing or fail-over modes, and encrypted Virtual Private Network (VPN) access for remote users). Four gigabit PoE+ ports enable users to power access points, IP cameras, and other PoE+ devices directly from the router. Supports both PoE (802.3af) and PoE+ (802.3at) devices with a 120W PoE power budget. The Industrial AC1200 gigabit router is equipped with an IP30 rated metal housing, and designed to operate within a wide temperature range of -30° – 70° C (-22° – 158° F) for industrial environments.
Advanced traffic management controls, troubleshooting, and SNMP monitoring support make this a powerful solution for SMB networks. This wireless router features advanced management, QoS, VLAN, VPN, and other capabilities to ensure optimal performance, scalability, and protection of your network. Intelligently manage your offices’ web access with our advanced contenting filtering tool, increase employee productivity, and finally take control of your internet.
Connect up to two separate WAN internet connections (Ethernet & WiFi) to efficiently load-balance traffic, or configure for redundancy using the WAN fail-over mode.
Four gigabit PoE+ ports power APs, IP cameras, and other PoE+ devices directly from the router. Supports both PoE (802.3af) and PoE+ (802.3at) devices with a 120W PoE power budget.
Features dual-band AC1200 WiFi to maximize device networking speeds; it’s equipped with an 867Mbps Wireless AC network, and a 300Mbps Wireless N network.
TRENDnet’s 12-Port 10G Layer 2 Managed SFP+ Switch, model TL2-F7120, offers advanced traffic management controls to meet the evolving demands of SMB networks. This rack-mountable IPv6-ready managed switch comes with an intuitive web-based interface. Advanced management features on this ultra-fast 10G SFP+ switch include LACP to increase bandwidth between switches by grouping ports together, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring, making this a powerful solution for any SMB network. Improve voice performance by isolating and prioritizing VoIP traffic from normal data traffic with an easy-to-use voice VLAN feature.
TRENDnet’s 24-Port Gigabit Managed Layer 2 Switch, model TL2-G244, has 24 x Gigabit ports, 4 x shared SFP slots, a console port, and an advanced Layer 2 management feature set. This IPv6 ready switch offers traffic management, troubleshooting, access control, and monitoring features needed to build a SMB network.
Features such as Command Line Interface, MSTP, Private/Voice VLAN, QoS, and Link Aggregation provide robust management options.
RMON, SNMP, SNMP Trap, and Port Mirroring support administrator monitoring solutions.
Fanless design reduces energy consumption and operating noise in a server room or at a workgroup station.
TRENDnet’s 2.5G PoE++ Injector, model TPE-219GI, combines electrical power with a 2.5GBASE-T network connection to produce an ultra-fast 2.5G PoE++ network signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE++ devices. Connect the TPE-219GI 2.5G PoE++ injector to a non-PoE switch, and run an Ethernet cable with data + power to network a PoE++ device up to 100 meters (328 ft.) away. Network PoE devices such as wireless access points, IP cameras, VoIP phone systems, IPTV decoders, access controls, and more.
The 2.5G PoE++ injector supplies a PoE device with PoE (15.4W), PoE+ (30W), or PoE++ (90W) power.
Equipped with a 2.5GBASE-T RJ-45 port providing network speeds of up to 2.5Gbps over existing Cat5e or better cabling.
Wall-mount design and a sturdy metal enclosure accommodates most installations scenarios.
TRENDnet’s Unmanaged Gigabit PoE+ Switches provide high-bandwidth performance, ease of use, and reliability. These IEEE 802.3at compliant switches conveniently feature a sturdy 1U 19” rack-mountable metal housing with mounting brackets included. These gigabit PoE+ switches with SFP slots also support long-distance fiber network applications.
Installers and integrators can save on equipment costs and reduce installation time with TRENDnet’s unmanaged gigabit PoE+ switches by delivering up to 30W per port of PoE+ power and data over existing Ethernet cables. Easily network PoE devices, such as high-power wireless access points, PTZ cameras, digital signage, IPTV decoders, and access controls with these reliable gigabit PoE+ switches with SFP support.
Gigabit ports feature a full switching capacity on this rackmount PoE+ switch, with SFP slots for long-distance fiber applications.
With a sturdy metal housing and rackmount brackets included, this switch is well-suited for 19” 1U rack installations.
A 240W total PoE power budget supports 16 PoE+ devices with up to 30W per port.
PACKAGE CONTENTS |
|
PACKAGE CONTENTS |
|
PACKAGE CONTENTS |
|
TRENDnet’s standalone 8-channel H.265 PoE+ NVR, model TV-NVR408, offers a comprehensive rack mountable camera management solution. The NVR networks and powers up to eight PoE cameras*. Install up to 12TB of storage (hard drives not included) to record over one month of continuous video from eight 1080p HD PoE cameras**. The TV-NVR408 features advanced video playback and comes with a free iOS®/Android™ app.
TRENDnet’s Gigabit Multi-WAN VPN Business Router, model TWG-431BR, features internet WAN load balancing, a network fail-safe backup, and encrypted Virtual Private Network (VPN) access for remote users. Improve peak-network-loading performance and eliminates network downtime with the use of the VPN router’s multiple WAN ports. Smooth network loading, minimize network downtime, and allow employees to access your network from the Internet—all with a single router. The VPN router features advanced management, high availability, QoS, VLAN, VPN, and other capabilities to ensure optimal performance, scalability, and protection of your network. Advanced SPI, NAT and SNAT protects against Internet attacks.
The TWG-431BR comes fully integrated with Router Limits’ comprehensive web management system, designed to give users more control over the activity on their network. Manage screen time, filter content, track web use and browsing history, as well as device level controls and more. Router Limits’ software is also available for mobile devices, providing you better management of your connected network.
The latest software upgrade adds support for DPI and speed test. DPI analyzes data traffic and provides more detailed information on specific devices or users, such as bandwidth usage, content being downloaded or viewed, apps that are used, and more. This allows both IT administrators at work and parents in the home to better monitor and manage network traffic. Conveniently run speed tests remotely between your TRENDnet router and ISP to check your Internet connection speeds for connectivity or bandwidth issues.
Connect up to four separate WAN internet connections to efficiently load-balance traffic by distributing network traffic to the best available link.
The VPN router creates an encrypted VPN tunnel to access local area network resources remotely using IPSec, PPTP, L2TP w/ IPsec, and SSL VPN protocols.
Group multiple TWG-431BR routers together to create a high availability network with router redundancy to minimize downtime.