Shop
Showing 221–240 of 671 results
-
Industrial Ethernet Extender DDW-226
The Wolverine DDW-226 allows effective Ethernet networks to be created over long distances (up to 15 km) at data rates up to 15.3 Mbit/s. The SHDSL technology makes it possible to reuse many types of pre-existing copper cables which can lead to considerable financial savings. Dependent on cable characteristics, distances up to 15 km (9.3 mi) can be achieved. The combination of WeOS and the integrated RS-232 port allows legacy equipment to become part of an IP backbone network.
-
Industrial Ethernet Extender DDW-242-485
Westermo’s Ethernet extender technology based on SHDSL makes it possible to reuse many types of pre-existing copper cables, which can lead to considerable financial savings when installing new systems. The Wolverine DDW-242 allows effective Ethernet networks to be created over long distances (up to 15 km (9.3 mi)) at data rates up to 15.3 Mbit/s on a single twisted pair cable. By using two pairs “bonded” this rate can be doubled up to 30.6 Mbit/s. The integral switch allows2 Ethernet devices to be attached and an RS-232 port allows for a legacy piece of equipment to be incorporated into the IP network.
-
Industrial Ethernet Extender
DDW-120The Westermo Industrial Ethernet Extender Wolverine DDW-120 series of Ethernet extenders allow cost effective Ethernet networks to be created over long distances, at data rates of up to 15.3 Mbit/s. The SHDSL technology makes it possible to reuse many types of pre-existing copper cables. This can lead to considerable financial savings as expensive fibre cables do not need to be installed. Dependent on cable characteristics, distances up to 15 km (9.3 mi) can be achieved. Configuration of the Westermo Industrial Ethernet Extender Wolverine DDW-120 is performed using only DIP switches, which ensures rapid installation.
-
Industrial Ethernet Extender
DDW-142The Westermo Industrial Ethernet Extender Wolverine DDW-120 series of Ethernet extenders allow cost effective Ethernet networks to be created over long distances, at data rates of up to 15.3 Mbit/s. The SHDSL technology makes it possible to reuse many types of pre-existing copper cables. This can lead to considerable financial savings as expensive fibre cables do not need to be installed. Dependent on cable characteristics, distances up to 15 km (9.3 mi) can be achieved. Configuration of the Westermo Industrial Ethernet Extender Wolverine DDW-120 is performed using only DIP switches, which ensures rapid installation.
-
Industrial Ethernet Extender
DDW-225The Industrial Ethernet Extender Wolverine DDW-225 allows effective Ethernet networks to be created over long distances (up to 15 km) at data rates up to 15.3 Mbit/s. The SHDSL technology makes it possible to reuse many types of pre-existing copper cables which can lead to considerable financial savings. Dependent on cable characteristics, distances up to 15 km (9.3 mi) can be achieved. The wolverine DDW-225 is powered by the WeOS operating system allowing complex networking functions to be easily configured. For simple applications, no configuration is required making the unit ideal for rapid installation.
-
Industrial Ethernet Extender
DDW-226The Westermo Industrial Ethernet Extender Wolverine DDW-226 allows effective Ethernet networks to be created over long distances (up to 15 km) at data rates up to 15.3 Mbit/s. The SHDSL technology makes it possible to reuse many types of pre-existing copper cables which can lead to considerable financial savings. Dependent on cable characteristics, distances up to 15 km (9.3 mi) can be achieved. The combination of WeOS and the integrated RS-232 port allows legacy equipment to become part of an IP backbone network.
-
Industrial Ethernet Media Converter
MCI-211GThe MCI-211G is a simple and cost effective Gigabit Ethernet media industrial converter suitable for use in a wide range of factory and building automation applications. The MCI-211G features Link Fault Forwarding (LFF) in order to forward link status changes to alert remote or central management systems via the connected media.
-
Industrial Ethernet Media Converter
MCI-422 MM/SMThe MCI-422 is Industrial Converter with a simple and cost effective Ethernet device suitable for use in a wide range of factory and building automation applications. The device can be used as either a switch or a dual channel converter. Two models are available – The SC2 for use on up to 2 km (1.24 mi) of multimode fibre and the SC30 for single-mode applications to 30 km (18.6 mi).
-
Industrial Ethernet Media Converter
MCW-211 SeriesThe MCW-211 is an Industrial unmanaged media converter designed for easy use in heavy duty industrial applications. The MCW-211 transparently converts between 10/100Base-TX and 100Base-FX. A number of standard fibre optic connection types are supported including LC, SC and ST. The unit supports 802.1Q long packets which allows all standard industrial Ethernet protocols to to be used.
-
Industrial Ethernet Switch – JetNet 2005
Korenix JetNet 2005 is an Industrial 5-port 10/100Base-TX Ethernet switch. JetNet 2005 adopts slim industrial design to save rail space for compact systems. In order to survive under harsh environment, JetNet 2005 features an industrial-grade aluminum case with IP31 grade protection ability against dust and water. JetNet 2005 provides one relay output for port link down events, which is enabled/ disabled by the DIP switch. Moreover, JetNet 2005 has good immunity against unstable power source and can accept DC 18~32V power input by terminal block.
-
Industrial Ethernet Switch – JetNet 2005f
Korenix JetNet 2005f is an Industrial with 4 ports 10/100Base-TX and one 100Base-FX Fast Ethernet switch. With the fiber uplink function, it enlarges the transmission distance to 2KM by multi-mode fiber (JetNet 2005f-m) or 30KM by single-mode fiber (JetNet 2005f-s). The JetNet 2005f adopts slim and rigid aluminum case to save rail space and provides good heat radiation ability for compact system requirement. In order to be operated in harsh environment, JetNet 2005f is equipped with IP31 grade case design to meet the requirements of drop-water and dust proof. The JetNet 2005f also provides one relay output for port error events, which is enabled/ disabled by the DIP switch. Moreover, JetNet 2005f has good immunity against unstable power source and can accept DC 18~32V power input by terminal block.
-
Industrial Ethernet Switch – JetNet 3008
The JetNet 3008 V3 is an 8-port Fast Industrial Ethernet switch designed with enhanced design specifications, including wider operating temperature and power input range to best fit in heavy industrial field applications. It is equipped with 2.0Gbps High performance switching engine with packet forwarding and filtering mechanism to fulfill higher performance industrial data communication requirements in field site deployments. The graceful packet forwarding ability enables the JetNet 3008 V3 to handle from 64 to 1552 packet sizes into 2 forwarding priority queues which is compliant with IEEE 802.1p Class of Service for providing best data performance. In addition, to ensure best network performance, both broadcast storm filtering and flow control functions can ensure your data traffic delivery to destination without traffic congestion. The combination of enhanced network features and rugged specs make the JetNet 3008 V3 become your best entry-level networking solution in industrial deployments.
-
Industrial Ethernet Switch – JetNet 3008f
The JetNet 3008f V3 is an 8-port Fast Industrial Ethernet switch designed with 6 RJ45 fast Ethernet copper and 2 fast Ethernet fiber ports of multi-mode or single-mode fiber optic cables as well as with enhanced design specifications, including wider operating temperature and power input range to best fit in long distance heavy industrial field applications. It is equipped with 2.0Gbps High performance switching engine with packet forwarding and filtering mechanism to fulfill higher performance industrial data communication requirements in field site deployments. The graceful packet forwarding ability enables the JetNet 3008f V3 to handle from 64 to 1552 packet sizes into 2 forwarding priority queues which is compliant with IEEE 802.1p Class of Service for providing best data performance. In addition, to ensure best network performance, both broadcast storm filtering and flow control functions can ensure your data traffic delivery to destination without traffic congestion. The combination of enhanced network features and rugged specs make the JetNet 3008f V3 become your best entry-level networking solution for extended distance industrial deployments.
-
Industrial Ethernet Switch – JetNet 3008G
JetNet 3008G, the 8-port full Gigabit Industrial Ethernet Switch, ensures high switching performance and easy installation which is an ideal solution for the most bandwidth demanding applications such as IP surveillance. Along with its high switching performance, JetNet 3008G supports QoS, broadcast storm filtering to ensure quality traffic transmission. JetNet 3008G further supports up to 9.6K bytes Jumbo frame for efficient data transmission.
JetNet 3008G is designed for operating reliably under harsh environments. JetNet 3008G supports dual power inputs and one alarm relay to indicate fault conditions when any link or power failure happens as a result, increasing the system reliability. Its IP31 rugged aluminum housing provides great injection protection and heat dispersion capability for the need of -10~70oC wide operating temperature.
-
Industrial Ethernet Switch – JetNet 3010G
The Korenix JetNet 3010G is an Unmanaged Ethernet Industrial Switch, which is equipped 7 ports RJ-45 10/100Mbps and 3 ports Gigabit TX with SFP combo. The SFP ports are compatible with accept all of SFP types Gigabit SFP Transceiver, which could be Gigabit SX, LX, LHX, ZX and XD for several of connections and distances.
-
Industrial Ethernet Switch – JetNet 3018G
The Korenix JetNet 3018G is an Industrial Ethernet Switch, equipped with 16 RJ-45 10/100Mbps ports and 2 10/100/1000TX with 1000-SX SFP combo ports. The SFP ports accept all types of Gigabit SFP Transceivers, such as Gigabit SX, LX, LHX, ZX and XD for several connections and distances. The JetNet 3018G also supports Jumbo frame transmission, up to 9216-bytes packet size, which is crucial especially while the industrial applications requesting the transmission with large size files. The JetNet 3018G adopts the rigid aluminum case, the unique Korenix-Design, which is the right option for the hazardous environments.
-
Industrial Ethernet Switch – JetNet 4006
Korenix JetNet 4006 series is an Industrial Managed fast Ethernet Ring switch equipped with 4 10/100 Mbps ports plus 2 10/100 Mbps uplink ports for forming redundant connection in industrial Ethernet applications. The LLDP design allows the switches to be managed and configured easily by a single administrator console, where the topology can be automatically drawn in just seconds. The JetNet 4006 series combines more advanced Layer2 management protocols, such as the DHCP option 82, VLAN, IGMP snooping or SNMPv3 for efficiently controlling and managing the network performance in industrial environments.
-
Industrial Ethernet Switch – JetNet 4006f
Korenix JetNet 4006f is an Industrial Managed fast Ethernet Ring switch equipped with 4 10/100 Mbps ports plus 2 100 Mbps fiber uplink ports for forming redundant connection in industrial Ethernet applications. The LLDP design allows the switches to be managed and configured easily by a single administrator console, where the topology can be automatically drawn in just seconds. The JetNet 4006f series combines more advanced Layer 2 management protocols, such as the DHCP option 82, VLAN, IGMP snooping or SNMPv3 for efficiently controlling and managing the network performance in industrial environments.
-
Industrial Ethernet Switch – JetNet 4010
JetNet 4010 is an industrial Managed Fast Ethernet Switch, designed with 7-10/100TX and 3-10/100 RJ-45 / 100FX SFP combo ports. The flexible 3 combo ports offer flexibility for additional fiber connections by plugging different types of 100MM SFP modules, which can support 2KM in Multi-Mode or 120KM in Single-Mode. The combo ports make port combination even easier, such as 8 RJ ports and 2 fiber ports, or 9 RJ ports and 1 fiber port. The standard 10 port Fast Ethernet switch greatly reduces total cost by up to 15% for fiber uplink network.
-
Industrial Ethernet Switch – JetNet 4508
The JetNet 4508 V2 is an 8-port industrial managed Fast Ethernet Switch designed with advanced Layer 2 management features and high system reliability, including MSR and MSTP network redundancy technologies, for ensuring real-time and high quality connectivity in various networking applications. The Ethernet switch includes 8 10/100Mbps Fast Ethernet ports with RJ-45 connectors and 32Gbps switch fabric to provide real time non-blocking transmission performance for satisfying the needs of high bandwidth data transmission requiring applications while ensuring traffic switching without data loss.Besides, the new system design includes a hardware based watchdog timer for keeping the operating system live. It also provides power redundancy with wide range DC10V~60V inputs for ensuring the power continuity in the system. Combining the outstanding L2 management features along with the LLDP and the JetView Pro Intelligent NMS into the ruggedized design with IP31 enclosure and -25~70oC (JetNet 4508 V2) and -40~75oC (JetNet 4508-w V2) wide operating temperature, JetNet 4508 V2 switches provide highly reliable and secure data transmission under severe industrial environments.