JetCon
Showing all 8 results
-
JetCon 1302
JetCon 1302 is not only a compact 2-port RJ45 to fiber media converter, but also a slim 3-port switch which is an ideal model that would physically fit in a network environment with limited space. The feature of fault relay alarm aims to inform you whenever there is any port link down. Just move up the DIP switch, and the fault relay alarm will start functioning! Single-mode and Multimode fiber optic ports meet your needs for long distance transmission of up to 30KM.
-
JetCon 1702
JetCon 1702 is an advanced and cost effective high power PoE injector; it applies power to Ethernet RJ-45 data pairs or spare pairs for the powered device (PD), JetCon is designed with IEEE 802.3 at and IEEE 802.3af compliance. JetCon 1702 offers 2 channels PoE injectors which is very suitable for the remote wireless access, video surveillance applications where power is lack.
-
JetCon 2201 Series
The standard RS-232 protocol has been widely used in most of industrial computer systems for serial port communication. However, it has its limitations in terms of transmission speed, range and networking capabilities. Furthermore, the RS-422 and RS-485 standards have overcome the limitations mentioned above by utilizing different voltage lines for data and control signals. Hence, JetCon 2201-w series, the RS-232 to RS-422/485 converter becomes very popular to be deployed in the industrial communication network for longer distance and higher reliability.
-
JetCon 2301
JetCon 2301 is a single port Fast Ethernet to Fiber media converter, compliant with EMC requirements of EN 50121-3-2 Railway standard to provide excellent performance under harsh environments featuring intensive vibration/shock and severe electromagnetic interference. Users can benefit from the Single-mode and Multi-mode fiber optic ports of the media converter for providing extended distance transmission of up to 30KM.
-
JetCon 2302
JetCon 2302 is not only a compact 4-port switch, but also a 2 channel RJ45 to fiber media converter – an ideal model that would physically fit in harsh environments with intensive severe electromagnetic interference. In switch mode, JetCon 2302 is an Industrial 4-port 10/100Mbps Fast Ethernet Fiber Switch, incorporating 3.2Gbps switching fabric with non-blocking store and forward technology to fulfill the high transmission performance requirements. In converter mode, JetCon 2302 is an Industrial 2-channel 10/100 TX to 100 FX media converter, with an alarm relay to trigger out a real alarm signal for port or power events.
-
JetCon 2401
JetCon 2401 is a 1-port RS232/422/485 serial to fiber media converter with extended fiber transmission. Single-mode and Multi-mode fiber optic ports meet your needs for long distance transmission up to 40KM. JetCon 2401 will automatically detect the data baud rate of the connected full-duplex serial device, ranging from 300 to 921,600bps. By moving up the DIP switch, JetCon 2401 supports an auto setting function without system power reset to change serial interface, fiber wiring architecture and termination of receiver and transmission line. Also JetCon 2401 is specially designed for applications requiring good immunity of EMI/EMS such as power substation, rail and traffic control signification systems under severe electromagnetic interference and wide temperature range.
-
JetCon 2502
JetCon 2502 is an Ethernet/POTS to VDSL2 (Very High-Rate Digital Subscribe Loop -2) extender and is compliant with ITU-T G.993.2 standard. It allows carriers to deliver Ethernet data up to 100Mbps in both upstream and downstream over existing twisted copper. The Ethernet/POTS (Plain Old Telephone Service) converter features Discrete Multi -Tone modulator/ de-modulator and VDSL Analog Front End (AFE) technology; it is an ideal solution to carry POTS signal and Ethernet Data stream to 3000 feet to extend local LAN and voice on the same line.
-
JetCon 3401G
The JetCon 3401G, industrial Gigabit Ethernet media converter is equipped with a rugged aluminum alloy case with IP31 grade ingress protection against damage by solid objects or dust. With excellent heat dissipation characteristics, the JetCon 3401G is capable of performing better than ordinary Gigabit Ethernet media converters which are enclosed by steel metal with various heat dissipation holes. Unlike those with a single power input, the real time redundant power backup on JetCon 3401G leads to the functionality of a reliable Industrial Gigabit Ethernet Media Converter with the non-stop transmission.