TRENDnet TI-WP100 – Industrial AC1200 Wireless Gigabit PoE+ Router

Standards

• IEEE 802.3

• IEEE 802.3u

• IEEE 802.3x

• IEEE 802.3ab

• IEEE 802.1Q

• IEEE 802.1X

• IEEE 802.11a

• IEEE 802.11b

• IEEE 802.11g

• IEEE 802.11n (up to 300Mbps @ 256QAM)*

• IEEE 802.11ac (5GHz: up to 867Mbps @ 256QAM)*

• IEEE 802.3af

• IEEE 802.3at

Device Interface

• 4 x Gigabit PoE+ ports

• 1 x Gigabit WAN port

• 2 x Wireless WAN uplink (2.4GHz or 5GHz)*

• 1 x USB 2.0 (Log Storage)

• 4 x RP-SMA antenna connectors (2 x 2.4GHz/5GHz WLAN, 2 x 5GHz)

• 8-pin removable terminal block (primary/RPS power inputs & digital input/output)

• 4-pin removable terminal block RS-232/RS-485 serial port (Modbus)

• LED indicators

• Reset button

Performance

• NAT (LAN-to-WAN) throughput: 900Mbps

• Routing performance: 900Mbps

• Maximum concurrent sessions: 32,000

• Maximum number of VLANs: 4 (ID: 1-4091)

• IPsec VPN (AES-256/SHA-256/LAN-to-LAN) throughput: 160Mbps

• SSL VPN (OpenVPN®) Throughput (Blowfish/SHA-1/Server): 20Mbps

VPN

• SSL VPN Tunnels: Up to 2

• IPsec VPN Tunnels: Up to 16 tunnels

• SSL OpenVPN Modes: Server, Client

• SSL OpenVPN Encryption: Blowfish, AES-128/192/256

• SSL OpenVPN Authorization: TLS with RSA, Static Key

• SSL OpenVPN Hash Algorithm: MD4, MD5, SHA-1/256/512

• IPsec VPN Modes: Site-to-Site, Client-to-Site or Dynamic VPN

• IPsec Encryption: DES, 3DES, AES-128/192/256

• IPsec Hash Algorithm: MD5, SHA-1/256

• IPsec Key Exchange: IKEv1/2, Main/Aggressive Mode, Pre-shared key, X.509, DH Groups 1/2/5/14-18

• IPsec Protocols: ESP/AH, PFS DH Groups 1/2/5/14-18, X-AUTH, DPD, Local/Remote ID: FQDN, User@FQDN, Key ID

• IPsec NAT Traversal

Networking

• WAN Modes: NAT, Classical Routing or Bridge Mode (NAT Disabled)

• NAT Loopback Enable/Disable

• NAT Modes: NAT, PAT, One-to-One NAT

• VLAN tag assignment on WAN interface

• IPv4 WAN Modes: Dynamic IP (DHCP), Static IP, PPPoE, PPTP, L2TP

• Wireless WAN Mode: NAT enable/disable, Dynamic IP (DHCP), Static IP, fast roaming signal threshold/channels

• IPv6 WAN Modes: Static, Auto-configuration (SLAAC/DHCPv6), Link-Local, PPPoE

• VLAN ID assignment on WAN interface

• IGMP proxy on WAN interface

• WAN IP address alias

• Routing: Static (Up to 64 entries), RIPv1/v2, OSPFv2, BGP4

• Static ARP (Up to 32 entries)

• VLAN: Port-based, 802.1Q (Up to 4 VLANs, 4 IP interfaces)

• Inter-VLAN Routing

• SSID per VLAN assignment

• DHCP Server, Relay, Options 42/66/72/114/150/160

• Dynamic DNS: dyn.com, no-ip.com

• WAN Failover

• Networking monitoring for WAN load balancing (DNS query or ICMP, latency threshold, fail threshold, query threshold)

• WAN Traffic load balancing: Smart Weight (Automatic), Specific Weight Percentage, User defined traffic policy

• VPN passthrough: IPsec, PPTP, L2TP

• Up to 8 SSIDs per band

• AP Router, WDS only, and WDS hybrid modes

• WiFi scheduling

• 5G WiFi bandsteering

Access Control

• Wireless encryption: WPA/WPA2-PSK, WPA/WPA2-RADIUS

• Wireless IDS

• Certificate management (Root CA, SCEP, Local certificate, self-signed, RSA, Import PEM certificates)

• NAT/SPI, virtual server/port forwarding, port triggering, firewall traffic rules, DMZ host, allow/deny ping on WAN interfaces

• ALG: PPTP/L2TP/IPsec VPN passthrough

• MAC filtering

• Custom scheduling for access control rules

• MMI (max. password attempts, login timeout, HTTP/HTTPS, HTTPS certificate, HTTP compares/binding)

• Wireless client isolation

• Stealth Mode

• DoS prevention

Quality of Service

• Software-based priority queues

• Hardware-based bandwidth control

• WMM

Management

• HTTP/HTTPS web-based GUI

• CLI: Telnet / SSHv2

• Command script

• TR-069/STUN

• SNMP v1, v2c, v3

• SNMP trap (up to 4 receivers)

• Modbus Slave, gateway for TCP, and RTU/ASCII master/slave access

• Virtual COM RFC2217, TCP client, TCP server, UDP

• Data logging (sniffer, offline proxy, full-time proxy)

• Device configuration backup & restore, upgrade firmware, reboot, and reset to default

• Scheduled auto reboot

• Auto restore configuration

• Set custom UI logo

• Set custom CSS

• Wake-on-LAN (WoL)

• Diagnostic tools: Built-in ping, traceroute, speed test, and packet capture utilities

• Event configuration and management: digital input/output, Modbus, syslog, SNMP trap, email alert, reboot

• System time settings (NTP, manually set, or copy from PC, time zone, and daylight savings time)

• FTP/FTPS/SFTP server

• Creates groups (IP, MAC, or host name), external server object definition

MIB

• MIB II RFC 1213

Frequency

• 2.412 – 2.462GHz

• 5.150 – 5.250GHz, 5.725 – 5.850GHz

Modulation

• 802.11b: CCK, DQPSK, DBPSK

• 802.11a/g: OFDM with BPSK, QPSK and 16/64-QAM

• 802.11n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM with OFDM

• 802.11ac: OFDM with BPSK, QPSK and 16/64/256-QAM

Media Access Protocol

• CSMA/CA with ACK

Antenna Gain

• 4 x 2.4GHz 2.5dBi / 5GHz: 3.5 dBi dual-band detachable/external

Wireless Output Power (max output power without antenna gain)

• 802.11a: FCC: 21 dBm (max.) / ETSI: 17.38 dBm (max.)

• 802.11b: FCC: 26 dBm (max.) / ETSI: 17.38 dBm (max.)

• 802.11g: FCC: 23 dBm (max.) / ETSI: 17.38 dBm (max.)

• 802.11n (2.4GHz): FCC: 21 dBm (max.) / ETSI: 14.38 dBm (max.)

• 802.11n (5GHz): FCC: 21 dBm (max.) / ETSI: 16.4 dBm (max.)

• 802.11ac: FCC: 21 dBm (max.) / ETSI: 16.4 dBm (max.)

Receiving Sensitivity

• 802.11a: -68 dBm (typical) @ 54Mbps

• 802.11b: -83 dBm (typical) @ 11Mbps

• 802.11g: -70 dBm (typical) @ 54Mbps

• 802.11n (2.4GHz): -66 dBm (typical) @ 300Mbps

• 802.11n (5GHz): -64 dBm (typical) @ 300Mbps

• 802.11ac: -55 dBm (typical) @ 867Mbps

Wireless Channels

• 2.4GHz: FCC: 1 – 11, ETSI: 1 – 13

• 5 GHz: FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165; ETSI: 36, 40, 44, 48

Power

• PWR (Primary) terminal input: 24 – 56V DC

• RPS (Redundant) terminal input: 24 – 56V DC

• Digital Input: Logic 0: 0V-2V, Logic 1: 5V-30V

• Digital Output: Relay Mode, up to 30V/1A

• Compatible power supply: TI-S12048 (120W), TI-S12024 (120W), TI-S24048 (240W) sold separately

• Max. Consumption: 20W (no PoE load), 140W (full PoE load)

PoE

• PoE budget: 120W@48V DC input, 120W@24V DC input

• 802.3at: Up to 30W per port

• PoE Mode A: Pins 1, 2, 3, and 6 for power

• PoE auto classification

• PoE port priority/power limit/power scheduling/PD alive check

• Over current/short circuit protection

Terminal Block

• Redundant power inputs, alarm relay contact, 8 pin

• Wire range: < 2.5 mm^2

• Solid wire (AWG): 12-24

• Stranded wire (AWG): 12-24

• Wire strip length: 5mm

Enclosure

• IP30 rated metal enclosure

• Fanless passive cooling

• DIN-Rail mount

• Grounding point

• ESD (Ethernet) Protection: 8KV DC

• Surge (Power) Protection: 2KV DC

MTBF

• 333,367 hours @ 25° C

• 222,166 hours @ 70° C

Operating Temperature

• -30° – 70° C (-22° – 158° F)*

Operating Humidity

• Max. 95% non-condensing

Dimensions

• 160 x 120 x 51mm (6.3 x 4.72 x 2.01 in.)

Weight

• 1.09kg (2.4 lbs.)

Certifications

• CE

• FCC

• Freefall (IEC 60068-2-32)

Warranty

• 3 year